Steel bending is a sophisticated and highly technical process
2024-07-17
Sets the bend angle and position. According to engineering drawings or specific requirements, adjust the bending angle and position on the mechanical equipment to ensure that the steel can be bent at the correct position and angle.
View Details
Pull Bend Manufacturer: Classification and Parameters of Pull Bend
2022-10-25
Stash bending is a workpiece stamping process that bends sheet metal, pipe, and steel into a specific curvature, shape, and size. Bending forming is widely used in the manufacture of high-pressure vessels, boiler drums, boiler tubes, hull steel plates and bone ribs, various utensils, instrument components, box inlays, etc. Below, the bending manufacturers share why the bending process is widely used in containers, boilers and cabinets.
View Details
Stent bending manufacturers share common problems in aluminum profile bending
2022-10-25
The basic principle of aluminum stretch bending forming is that the stretch die and the table top are fixed and fixed, and the support arm stretch steel rotates around the stretch bending die, so that the steel base material is plastically deformed under the action of tensile force and bending moment, so that it can cooperate with the die to obtain parts of the required shape. The following stretch bending manufacturers share common problems in the process of aluminum profile stretch bending forming.
View Details
Profile bending wrinkle is what's going on?
2022-10-25
Profile bending is very common in construction technology. Profile bending aluminum is suitable for a variety of profiles. The width-thickness ratio of rectangular cross-sectional profile is the main factor affecting the generation of folds, and it is also the reason for the folding of material properties.
View Details
Stent bending manufacturers detailed aluminum profile bending simulation modeling
2022-10-25
The bending forming process is complex, and there are many factors that affect the stretch formability, including the cross-section and structural morphology of aluminum profiles, material performance parameters, bending process morphology and equipment forming parameters. In the past, experience and trial production methods were mainly used to determine the reasonable stretch forming scheme of aluminum profiles, but the cost was high and the cycle was long. With the development of finite element CAE analysis technology, it is possible to quickly predict defects in the bending process, analyze the influence of each molding parameter on the molding results, so as to develop a reasonable molding scheme, help designers shorten the development cycle, reduce development costs, the following pull bending manufacturers detailed aluminum profile pull bending simulation modeling.
View Details
The classification of pull bending is introduced by the pull bending factory.
2022-10-25
Stamping bending is a stamping process in which metal plates, pipes and profiles are bent into workpieces with certain curvature, shape and size. Pull bending forming is widely used in the manufacture of high-pressure vessels, boiler drums, boiler tubes, hull steel plates and ribs, various utensils, instrument components, box inserts, etc.
View Details
Contact Phone
E-mail:yuanhaolawan@163.com
Address: No. 9, E6 District, jinjiaozhou steel market, Nanfang Jiayuan, Jiaozhou, Qingdao
Pay attention to WeChat
WeChat applet